Canon MultiPASS C755 Service Manual - Page 83
Defective Pattern Sample, Fig. 3-12
View all Canon MultiPASS C755 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
MultiPASS C755 Chapter 3: Maintenance & Service • Printing quality error • The printer does not at all. • Printing stops midway. • Certain colors are not printed. (1) Check that the orange cap or tape is not on the BJ cartridge. (2) Carry out nozzle cleaning on the BJ cartridge five times with the cleaning operation, than visually cheek the test print for non-discharge of ink from nozzle. (Fig. 3-12) (3) Remove and reinstall the BJ cartridge. (4) Replace the appropriate ink tank. (5) Replace the BJ cartridge. (6) Replace the purge unit. • Blotches appear • Blank ink appear (1) Carry out nozzle cleaning on the BJ cartridge five times with the cleaning operation, than visually cheek the test print for non-discharge of ink from nozzle. (Fig. 3-12) (2) Remove and reinstall the BJ cartridge. (3) Replace the appropriate ink tank. (4) Replace the BJ cartridge. (5) Check the connection of the carriage ribbon cable and the PCNT board. (J501/502) (6) Check the connection of the carriage ribbon cable and the carriage board. (CN1/CN2) (7) Replace the carriage ribbon cable. (8) Replace the carriage board. (9) Replace the PCNT board. (10) Replace the purge unit. Missing dots Unstable printing Splashed dots Figure 3-12 Defective Pattern (Sample) 3-32