Canon MultiPASS C755 Service Manual - Page 115
Modem and NCU tests, The V.34 modem sends G3 signals from the modular jack
View all Canon MultiPASS C755 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
MultiPASS C755 Chapter 3: Maintenance & Service 7.2.6 Modem and NCU tests These tests test modem and NCU transmission and reception. The modem tests check whether signals are sent correctly from the modem by comparing the sound of the signals from the speaker with the sounds from a normal modem. Also, you check on the display whether or not the modem correctly detected received tone signals and DTMF signals. End this test by pressing the STOP button. Modem test type Frequency test G3 signal transmission test V34 signal transmission test Overview The modem sends tone signals from the modular jack and the speaker. The modem sends G3 signals from the modular jack and the speaker. The V.34 modem sends G3 signals from the modular jack and the speaker a) Frequency test The frequency test menu is selected by pressing the 2 button from the MODEM NCU test menu. Signals of the frequencies below are sent from the modem using the modular jack and the speaker. The frequency can be changed with the numeric buttons. Numeric button 1 2 3 4 5 6 7 Frequency 462 Hz 1100 Hz 1300 Hz 1500 Hz 1650 Hz 1850 Hz 2100 Hz NOTE The transmission levels for each frequency follow the service data transmission level settings. 3-64