Canon MultiPASS C755 Service Manual - Page 112
D-RAM Test, 2.4 CS tests, 2.3 D-RAM tests
View all Canon MultiPASS C755 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
MultiPASS C755 Chapter 3: Maintenance & Service 7.2.3 D-RAM tests Pressing the 1 button from the test mode menu selects the D-RAM tests. D-RAM Test 1 writes data to the entire D-RAM region and reads it out to check that operations are correct. D-RAM Test 2 just reads data at high speed. Replace the SCNT board if an error occur. Operating 1:D-RAM 6848K VVV. . . . .VVV 6848K: D-RAM total memory capacity (bytes) V : Indicates an address for which write testing is complete. . : Indicates an address for which read testing is complete. Error Normal end Complete (no err) WRT : data written RD : data read ADR : address Error display WRT= 33CC RD= 3333 ADR= 2800 Restart by pressing START/COPY key. Error display Complete (err) Figure 3-29 D-RAM Test 7.2.4 CS tests Pressing the 2 button from the test mode menu selects the CS tests. ADJ LED TIME is used to adjust the CS LED lights-on duration and enter the contact sensor's shading data (pre-scan operation). REFERENCE Details on CS LED lights-on duration adjustment, see 3.1 CS LED Lights-on Duration Adjustment on page 3-6. Tests [2], [3], [4] and Tests [5] are not used in the field. 3-61