Canon MultiPASS C755 Service Manual - Page 132
Service Error Tx Report, RCV V.8 FRAME
View all Canon MultiPASS C755 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
MultiPASS C755 Chapter 3: Maintenance & Service a-3) Service activity report (sending/receiving) Figure 3-40 Service Error Tx Report Header : OK, NG messages TX/RX NO : Indicates four digits of the transaction number CONNECTION TEL : Number sent from the other party or number dialled (lower 20 digits) (OTHER PARTY) SUBADDRESS : Subaddress number sent from the other party CONNECTION ID : ID sent from the other party, if the other party is a Canon fax START TIME : Communication start date and time (on 24-hour display) USAGE TIME : Communication time (in minutes and seconds) PAGES : Number of pages for which transmission was complete (For details, see User's manual) RESULT : "NG" display with number of pages for which transmission was fault, and service error code MAKER CODE : Maker code [1000 1000] Indicates a Canon fax lower nibble upper nibble RCV V.8 FRAME : Received V.8 protocol signal SYMBOL RATE : Symbol rate used for the primary channel TX LVL REDUCTION : 0 (Fixed) ERR ABCODE : Code output by the modem when an error occurred (Not used in the field) ERR SECTXB : Transmit status of the modem when an error occurred (Not used in the field) ERR SECRXB : Received status of the modem when an error occurred (Not used in the field) RX/TX : Received/transmitted protocol signal bit 1 to bit 96 of received/transmitted DIS, DCS, or DTS NOTE The V.8/V.34-related items (RCV V.8 FRAME to ERR SECRXB) are not printed on the Notmal G3 Service Activity Report. 3-81