Canon MultiPASS C755 Service Manual - Page 107
PRINTER printer function settings, NUMERIC PARAM., Function, Selecting range, Default setting
View all Canon MultiPASS C755 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
MultiPASS C755 Chapter 3: Maintenance & Service #7 PRINTER (printer function settings) 2. NUMERIC PARAM. No. Function 05 Trailing edge margin for black&white copy & FAX 13 Trailing edge margin for color copy & color FAX Selecting range Default setting 0 ~ 9999 7 ( 7 mm) 0 ~ 9999 26 ( 26 mm) [Parameter 07] Sets the bottom margin for B/W printing (Copy & Fax). This parameter also sets the margins when PRINT MARGIN in user data is set to SMALLER for color printing. [Parameter 13] Sets the bottom margin for color printing. The margin used when PRINT MARGIN in user data is set to NORMAL can be changed by this parameter when color printing. However, when the trailing edge of the recording paper passes through the pinch roller when the margins have been narrowed, there are cases where a small amount of color shift occurs at the bottom edge of the image. 5. INK ABS CAPA This switch allows the waste ink capacity stored in the PCNT board to be checked or entered. [SUCTION] This allows the waste ink capacity for the ink absorbed during cleaning to be checked or entered. When entering the waste ink capacity, use the numeric buttons to enter a value 0 to 100 (%). NOTE The ink absorber's absorption capacity for the waste ink discharged by the BJ cartridge is set to a certain amount. The waste ink capacity settings are stored in the PCNT board's EEPROM. When replacing the PCNT board, check the waste ink capacity and enter the waste ink capacity into the new PCNT board. The various waste ink capacity can be checked with the SYSTEM DUMP LIST. 3-56