Canon MultiPASS C755 Service Manual - Page 91
Answering Machine Connection, 2.1 Settings, 2.2 Parameters, 3 Manual/Auto Reception Switching
View all Canon MultiPASS C755 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
MultiPASS C755 Chapter 3: Maintenance & Service 5.2 Answering Machine Connection This connection is for effective use of an answering machine connected to the extension phone jack. If the other party is a telephone, the answering telephone records the message, and if the other party is a fax, the fax receives automatically. 5.2.1 Settings (1) Connect the answering machine to the extension telephone jack, and set the answering machine to "Answer". (2) Press the fax's Receive Mode button and select the Ans. Machine mode. 5.2.2 Parameters Item CNG Signal detection time Default Setting 60 sec. Setting Switch Service data #3 25 Selection Range 0 to 999 sec. 5.3 Manual/Auto Reception Switching Determines if the fax switches to document receive mode, after the fax rings for a specified time when the fax is in the manual receive mode. 5.3.1 Settings (1) Set the "MAN/AUTO SWITCH" in the user data "RX SETTINGS" to "ON". (2) Set the number of seconds that the fax will wait after detecting ringing signal from the telephone line before going into reception, using user data "F/T RING TIME" in "MAN/AUTO SWITCH". 5.3.2 Parameters Item MAN/AUTO SWITCH F/T RING TIME Default Setting OFF 15 sec. Setting Switch User data User data Selection Range ON/OFF 1 to 99 sec. 3-40