Cisco 3725 Software Configuration Guide - Page 121
Step 7, Step 8, Step 9, Step 10, Step 11, Step 12, Step 13
UPC - 746320810911
View all Cisco 3725 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
Chapter 3 Configuring with the Command-Line Interface Configuring 1-Port G.SHDSL WAN Interface Card Command Step 7 Router(config-if-vc)# encapsulation {aal1 | aal2 | aal5ciscoppp | aal5mux | aal5nlpid | aal5snap} Step 8 Router(config-if-vc)# exit Step 9 Router(config-if)# dsl operating-mode {gshdsl symmetric annex {A | B} Purpose (Optional) Configures the ATM adaptation layer (AAL) and encapsulation type. • aal1-AAL1 • aal2-AAL2 • aal5ciscoppp-Cisco PPP over AAL5 • aal5mux-AAL5+MUX • aal5nlpid-AAL5+NLPID • aal5snap-AAL5+LLC/SNAP (the default) Exits from interface-atm-vc configuration mode. Configures the DSL interface to operate in a specified DSL mode: • gshdsl-Configures multirate, high-speed DSL per ITU G.991.2 • symmetric-Configures symmetrical mode per • ITU G.992.1. • annex-Configures the regional operating parameters. • A-Sets the operating parameters for North America. This value is the default. • B-Sets the operating parameters for Europe. Step 10 Router(config-if)# equipment-type {co | cpe} The default is gshdsl symmetric annex A Configures the DSL interface to function as central office equipment or customer premises equipment: • co-The WIC functions as central office equipment and can interface with another G.SHDSL WIC configured as cpe. • cpe-The WIC functions as customer premises equipment and can interface with a DSLAM or with another G.SHDSL WIC configured as co. The default is cpe. Step 11 Router(config-if)# dsl linerate Configures the DSL line rate: {kbps | auto } • kbps-Line rate (data transfer rate) in kilobits per second. Allowable entries are 72, 136, 200, 264, 392, 520, 776, 1032, 1160, 1544, 2056, and 2312. • auto-The WIC automatically trains for an optimal line rate by negotiating with the far-end DSLAM or WIC. Step 12 Router(config-if)# exit Step 13 Router(config)# exit The default is auto. Exits from ATM interface configuration mode. Exits from global configuration mode. OL-1957-04 Software Configuration Guide for Cisco 2600 Series, Cisco 3600 Series, and Cisco 3700 Series Routers 3-61