Cisco 3725 Software Configuration Guide - Page 161

Appendix A Configuration Examples Cisco 3640 Central Site Configuration to Support ISDN and Modem Calls Cisco 3640 Central Site Configuration to Support ISDN and Modem Calls The following configuration allows remote LANs and standalone remote users with modems to dial in to a central site. The following configuration example shows a Cisco 3640 router with the following hardware configuration: • One 2-port ISDN-PRI network module installed in slot 1 • One digital modem network module installed in slot 2 and slot 3 • One 1-port Ethernet network module installed in slot 0 Note Each MICA digital modem card has its own group async configuration. Additionally, a single range of async lines is used for each modem card. For additional interface numbering information, refer to the Digital Modem Network Module Configuration Note. ! version 11.2 service timestamps debug datetime msec service timestamps log datetime msec service password-encryption no service udp-small-servers no service tcp-small-servers ! hostname NAS ! aaa new-model aaa authentication login default local aaa authentication login console enable aaa authentication login vty local aaa authentication login dialin local aaa authentication ppp default local aaa authentication ppp dialin if-needed local enable secret cisco ! username admin password cisco username remotelan1 password dialpass1 username remotelan2 password dialpass2 username PCuser1 password dialpass3 username PCuser2 password dialpass4 async-bootp dns-server 10.1.3.1 10.1.3.2 isdn switch-type primary-5ess ! controller T1 1/0 framing esf clock source line linecode b8zs pri-group timeslots 1-24 ! controller T1 1/1 framing esf clock source line linecode b8zs pri-group timeslots 1-24 ! interface Loopback0 ip address 10.1.2.254 255.255.255.0 OL-1957-04 Software Configuration Guide for Cisco 2600 Series, Cisco 3600 Series, and Cisco 3700 Series Routers A-23