Cisco 3725 Software Configuration Guide - Page 52

Configuring Interface Parameters Chapter 2 Using the Setup Command Facility Table 2-2 ISDN Provisioning by Switch Type Switch Type 5ESS Custom BRI 5ESS Custom BRI 5ESS National ISDN (NI-1) BRI DMS-100 BRI Provisioning For data only 2 B channels for data Point to point Terminal type = E 1 directory number (DN) assigned by service provider MTERM = 1 Request delivery of calling line ID on Centrex lines Set speed for ISDN calls to 56 kbps outside local exchange For voice and data (Use these values only if you have an ISDN telephone connected.) 2 B channels for voice or data MultiPoint Terminal type = D 2 directory numbers assigned by service provider 2 service profile identifiers (SPIDs) required, assigned by service provider MTERM = 2 Number of call appearances = 1 Display = No Ringing/idle call appearances = idle Autohold= no Onetouch = no Request delivery of calling line ID on Centrex lines Set speed for ISDN calls to 56 kbps outside local exchange Directory number 1 can hunt to directory number 2 Terminal type = A 2 B channels for voice and data 2 directory numbers assigned by service provider 2 SPIDs required; assigned by service provider Set speed for ISDN calls to 56 kbps outside local exchange Directory number 1 can hunt to directory number 2 2 B channels for voice and data 2 directory numbers assigned by service provider 2 SPIDs required; assigned by service provider Functional signaling Dynamic terminal endpoint identifier (TEI) assignment Maximum number of keys = 64 Release key = no, or key number = no Ringing indicator = no EKTS = no PVC = 2 Request delivery of calling line ID on Centrex lines Set speed for ISDN calls to 56 kbps outside local exchange Directory number 1 can hunt to directory number 2 2-16 Software Configuration Guide for Cisco 2600 Series, Cisco 3600 Series, and Cisco 3700 Series Routers OL-1957-04