Cisco CP-7911G Administration Guide - Page 123
NTP Configuration Menu (SIP Phones Only
View all Cisco CP-7911G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
Chapter 4 Configuring Settings on the Cisco Unified IP Phone Device Configuration Menu Table 4-11 Media Configuration Menu Options (continued) Option Description To Change Enterprise Advertise G.722 Codec Enables/disables Cisco Unified IP Use Cisco Unified Communications Phones to advertise the G.722 codec to Manager Administration > System > Cisco Unified Communications Enterprise Parameters. Manager. If enabled (default), and if each endpoint in the attempted call supports G.722 in its capabilities set, Cisco Unified Communications Manager will choose G.722 for the call. Note When a phone is registered with a Cisco Unified Communications Manager that does not support this setting, the default is "Disabled." Device Advertise Allows you to override the Enterprise Use Cisco Unified Communications G.722 Codec Advertise G.722 Codec on a per-phone Manager Administration > Device > basis. Phone. The default is "Use System Default," which means the value configured for the Enterprise Advertise G.722 Codec parameter gets used. NTP Configuration Menu (SIP Phones Only) The NTP Configuration menu, which opens when you select NTP Configuration on the Locale Configuration menu, displays information about the NTP server and mode configuration used by the phone. Table 4-12 describes the options on this menu. For more information, see Locale Configuration Menu, page 4-24. OL11954-01 Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.0 4-29