Cisco CP-7911G Administration Guide - Page 146

Chapter 5 Configuring Features, Templates, Services, and Users Telephony Features Available for the Cisco Unified IP Phone Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued) Feature Call pickup Call Recording Call waiting Caller ID Description Configuration Reference Allows users to redirect a call that is ringing on another phone within their pickup group to their phone. You can configure an audio and/or visual alert for the primary line on the phone. This alert notifies the users that a call is ringing in their pickup group. For more information, refer to: • Cisco Unified Communications Manager Administration Guide, "Call Pickup Group" chapter. • Cisco Unified Communications Manager Features and Services Guide, "Call Pickup Group" chapter. Allows a supervisor to record an active call. The user might hear an intermittent tone (beep tone) during a call when it is being recorded. Note The intercom feature is disabled when a call is being monitored or recorded. For more information, refer to the Cisco Unified Communications Manager Features and Services Guide, "Monitoring and Recording" chapter. Receives a second incoming call on the same line without disconnecting the first call. Requires no configuration. Displays the telephone number and name of the caller. For more information, refer to the: • Cisco Unified Communications Manager Administration Guide, Configuring "Cisco Unified IP Phones" chapter • Cisco Unified Communications Manager System Guide, "Understanding Route Plans" chapter • Cisco Unified Communications Manager Features and Services Guide, "Call Display Restrictions" chapter Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.0 5-6 OL11954-01