Cisco CP-7911G Administration Guide - Page 72
Converting an In-Use Phone from SCCP to SIP, Converting an In-Use Phone from SIP to SCCP
View all Cisco CP-7911G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Chapter 2 Preparing to Install the Cisco Unified IP Phone on Your Network Using Cisco Unified IP Phones with Different Protocols Step 2 Step 3 Refer to the Cisco Unified Communications Manager Administration Guide for more information about Cisco Unified Communications Manager configuration. Refer to Bulk Administration Tool Administration Guide for more information about using the BAT. If you are not using DHCP in your network, configure the network parameters for the phone. See the "Configuring Startup Network Settings" section on page 3-14. Power cycle the phone. Converting an In-Use Phone from SCCP to SIP You can use the Bulk Administration Tool (BAT) to convert a phone that is in use in your network from SCCP to SIP. To access BAT from Cisco Unified Communications Manager Administration, choose Bulk Administration > Phones > Migrate Phones > SCCP to SIP. For more information, refer to the "Migrating Phones" chapter Bulk Administration Tool Administration Guide. Converting an In-Use Phone from SIP to SCCP To convert a phone that is in use in your network from SIP to SCCP, perform these steps. For more information, Cisco Unified Communications Manager Administration Guide. Procedure Step 1 Step 2 Step 3 In Cisco Unified Communications Manager Administration, delete the existing SIP phone from the Cisco Unified Communications Manager database. In Cisco Unified Communications Manager Administration, create the phone as an SCCP phone. Power cycle the phone. 2-18 Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.0 OL11954-01