Cisco CP-7911G Administration Guide - Page 130
> Device >, Phone, When CDP is disabled in Cisco Unified
View all Cisco CP-7911G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
Device Configuration Menu Chapter 4 Configuring Settings on the Cisco Unified IP Phone Table 4-16 Network Configuration Menu Options (continued) Option CDP: SW Port Description Indicates whether CDP is enabled on the switch port (default is enabled). • Enable CDP on the switch port for VLAN assignment for the phone, power negotiation, QoS management, and 802.1x security. To Change Use Cisco Unified Communications Manager Administration > Device > Phone. • Enable CDP on the switch port when the phone is connected to a Cisco switch. Note When CDP is disabled in Cisco Unified Communications Manager, a warning is presented, indicating that CDP should be disabled on the switch port only if the phone is connected to a non-Cisco switch. The current PC and switch port CDP values are shown on the Settings menu. 4-36 Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.0 OL11954-01