Cisco CP-7911G Administration Guide - Page 92

Configuring Security on the Cisco Unified IP Phone Chapter 3 Setting Up the Cisco Unified IP Phone Before You Begin Make sure that the appropriate Cisco Unified Communications Manager and the Certificate Authority Proxy Function (CAPF) security configurations are complete: • The CTL file should have a CAPF certificate. • The CAPF certificate must exist in the C:\Program Files\Cisco\Certificates folder in every server in the cluster. • The CAPF is running and configured. • The phone should have the correct load file. To verify the image, press the Applications Menu button and choose Settings > Model Information. Refer to Cisco Unified Communications Manager Security Guide for more information. To configure an LSC on the phone, follow these steps: Procedure Step 1 Step 2 Obtain the CAPF authentication code that was set when the CAPF was configured. From the phone, press the Applications Menu button and choose Settings > Security Configuration. Note You can control access to the Settings Menu by using the Settings Access field in the Cisco Unified Communications Manager Administration Phone Configuration Settings page. For more information, see Cisco Unified Communications Manager Administration Guide. Step 3 Press **# to unlock settings on the Security Configuration menu. (See the "Unlocking and Locking Options" section on page 4-4 for information using locking and unlocking options.) Note If a Settings Menu password has been provisioned, SIP phones present an "Enter password" prompt after you enter **#. Step 4 Scroll to LSC and press the Update softkey. 3-18 Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.0 OL11954-01