Cisco CP-7911G Administration Guide - Page 244
Applications Menu, Step 1
View all Cisco CP-7911G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 244 highlights
Resetting or Restoring the Cisco Unified IP Phone Chapter 9 Troubleshooting and Maintenance • Phone application-Erased (phone recovers by loading the term11.default.loads file) Note This phone must be on a DHCP-enabled network before you can perform these steps. To perform a factory reset of a phone, follow these steps: Procedure Step 1 Step 2 Step 3 Unplug the power cable from the phone and then plug it back in. The phone begins its power up cycle. While the phone is powering up, and before the Applications Menu button flashes on and off, press and hold #. Continue to hold # until the message LED on the handset flashes on and off in sequence in red. Release # and press 123456789*0#. You can press a key twice in a row, but if you press the keys out of sequence, the factory reset will not take place. After you press these keys, the message LED on the handset flashes faster in red and the phone goes through the factory reset process. Do not power down the phone until it completes the factory reset process and the main screen appears. 9-24 Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.0 OL11954-01