Cisco CP-7911G Administration Guide - Page 204

Disabling and Enabling Web Page Access Chapter 8 Monitoring the Cisco Unified IP Phone Remotely Disabling and Enabling Web Page Access For security purposes, you may choose to prevent access to the web pages for a phone. If you do so, you will prevent access to the web pages that are described in this chapter and to the phone's User Options web pages. To disable access to the web pages for a phone, follow these steps from Cisco Unified Communications Manager Administration: Procedure Step 1 Step 2 Step 3 Step 4 Step 5 Choose Device > Phone. Specify the criteria to find the phone and click Find, or click Find to display a list of all phones. Click the device name to open the Phone Configuration window for the device. From the Web Access drop-down list box, choose Disabled. Click Update. Note Some features, such as Cisco Quality Report Tool, do not function properly without access to the phone web pages. Disabling web access also affects any serviceability application that relies on web access, such as CiscoWorks. To enable web page access when it is disabled, refer to the preceding steps about disabling access. Follow these same steps, but choose Enabled in Step 4. Device Information The Device Information area on a phone's web page displays device settings and related information for the phone. Table 8-1 describes these items. To display the Device Information area, access the web page for the phone as described in the "Accessing the Web Page for a Phone" section on page 8-2, and then click the Device Information hyperlink. Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.0 8-4 OL11954-01