Cisco CP-7911G Administration Guide - Page 137

Chapter 4 Configuring Settings on the Cisco Unified IP Phone Security Configuration Menu Table 4-19 Trust List Information Option CAPF Server CallManager / TFPT Server SRST Router Description To Change IP address of the CAPF used by the phone. Also displays a certificate icon if a certificate is installed for this server. For more information about these settings, refer to the "Configuring the Cisco CTL Client" section in Cisco Unified Communications Manager Security Guide. IP address of Cisco Unified Communications Manager and TFTP servers used by the phone. Also displays a certificate icon if a certificate is installed for this server. For more information about these settings, refer to the "Configuring the Cisco CTL Client" section in Cisco Unified Communications Manager Security Guide. IP address of the trusted SRST router that is available to the phone, if such a device has been configured in Cisco Unified Communications Manager Administration. Also displays a certificate icon if a certificate is installed for this server. For more information about these settings, refer to the "Configuring the Cisco CTL Client" section in Cisco Unified Communications Manager Security Guide. 802.1X Authentication and Status Use the options that are described in the following tables to enable 802.1X authentication and monitor its progress: • Table 4-20 on page 4-44-802.1X Authentication Settings • Table 4-21 on page 4-45-802.1X Authentication Real-Time Status OL11954-01 Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.0 4-43