Cisco CP-7911G Administration Guide - Page 224

Resolving Startup Problems Chapter 9 Troubleshooting and Maintenance • Cisco Unified Communications Manager and TFTP Services Are Not Running, page 9-6 • Creating a New Configuration File, page 9-7 Identifying Error Messages As the phone cycles through the startup process, you can access status messages that might provide you with information about the cause of a problem. See the "Status Messages Screen" section on page 7-4 for instructions about accessing status messages and for a list of potential errors, their explanations, and their solutions. Registering the Phone with Cisco Unified Communications Manager A Cisco Unified IP Phone can register with a Cisco Unified Communications Manager server only if the phone has been added to the server or if auto-registration is enabled. Review the information and procedures in the "Adding Phones to the Cisco Unified Communications Manager Database" section on page 2-12 to ensure that the phone has been added to the Cisco Unified Communications Manager database. To verify that the phone is in the Cisco Unified Communications Manager database, choose Device > Find from Cisco Unified Communications Manager Administration to search for the phone based on its MAC Address. For information about determining a MAC address, see the "Determining the MAC Address of a Cisco Unified IP Phone" section on page 2-19. If the phone is already in the Cisco Unified Communications Manager database, its configuration file may be damaged. See the "Creating a New Configuration File" section on page 9-7 for assistance. Checking Network Connectivity If the network is down between the phone and the TFTP server or Cisco Unified Communications Manager, the phone cannot start up properly. Ensure that the network is currently running. Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.0 9-4 OL11954-01