Cisco CP-7911G Administration Guide - Page 211

Chapter 8 Monitoring the Cisco Unified IP Phone Remotely Network Statistics Table 8-2 Network Configuration Area Items (continued) Item Description Voice VLAN Enabled Indicates whether the phone allows a device attached (applies to 7911G to the PC port to access the Voice VLAN. only) Auto Line Select Enabled Indicates whether the phone shifts the call focus to incoming calls on all lines. DSCP for Call Control DSCP IP classification for call control signaling. DSCP for Configuration DSCP IP classification for any phone configuration transfer. DSCP for Services DSCP IP classification for phone-based services. Security Mode Displays the security mode that is set for the phone. Web Access Enabled Indicates whether web access is enabled (Yes) or disabled (No) for the phone. Span to PC Port (applies to 7911G only) Indicates whether the phone will forward packets transmitted and received on the network port to the access port. PC VLAN (applies to VLAN used to identify and remove 802.1P/Q tags 7911G only) from packets sent to the PC Network Statistics These network statistics areas on a phone's web page provide information about network traffic on the phone: • Ethernet Information area-Displays information about Ethernet traffic. Table 8-3 describes the items in this area. • Access area-Displays information about network traffic to and from the PC port on the phone. Table 8-4 describes the items in this area. • Network area-Displays information about network traffic to and from the network port on the phone. Table 8-4 describes the items in this area. To display a network statistics area, access the web page for the phone as described in the "Accessing the Web Page for a Phone" section on page 8-2, and then click the Ethernet Information, the Access, and or the Network hyperlink. OL11954-01 Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.0 8-11