Cisco CP-7911G Administration Guide - Page 215

Chapter 8 Monitoring the Cisco Unified IP Phone Remotely Streaming Statistics Streaming Statistics A Cisco Unified IP Phone can stream information to and from up to three devices simultaneously. A phone streams information when it is on a a call or running a service that sends or receives audio or data. The streaming statistics areas on a phone web page provide information about the streams. Most calls use only one stream (Stream 1), but some calls use two or three stream. For example, a barged call uses Stream 1 and Stream 2. To display a Streaming Statistics area, access the web page for the phone as described in the "Accessing the Web Page for a Phone" section on page 8-2, and then click the Stream 1, the Stream 2, or the Stream 3 hyperlink. Table 8-5 describes the items in the Streaming Statistics areas. Table 8-5 Streaming Statistics Area Items Item Remote Address Local Address Start Time Stream Status Host Name Sender Packets Sender Octets Sender Codec Sender Reports Sent1 Sender Report Time Sent1 Description IP address and UDP port of the destination of the stream. IP address and UPD port of the phone. Internal time stamp indicating when Cisco Unified Communications Manager requested that the phone start transmitting packets. Indication of whether streaming is active. Unique, fixed name that is automatically assigned to the phone based on its MAC address. Total number of RTP data packets transmitted by the phone since starting this connection. The value is 0 if the connection is set to receive only mode. Total number of payload octets transmitted in RTP data packets by the phone since starting this connection. The value is 0 if the connection is set to receive only mode. Type of audio encoding used for the transmitted stream. Number of times the RTCP Sender Reports have been sent. Internal time stamp indication when a RTCP Sender Report was sent. OL11954-01 Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.0 8-15