Compaq Armada 7300 Armada 7300 Family of Personal Computers Reference Guide - Page 58
Using MultiBay Adapters, Inserting a Hard Drive into the Armada 7300, Hard Drive MultiBay Adapter
View all Compaq Armada 7300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Using MultiBay Adapters Inserting a Hard Drive into the Armada 7300 Hard Drive MultiBay Adapter Before inserting a hard drive into the computer MultiBay, insert it into the Armada 7300 Hard Drive MultiBay Adapter. The adapter is included with an Armada 7300 hard drive option kit and is also available as a separate option. IMPORTANT: Before handling a removable drive, be sure you have read the cautions under "Caring for Removable Drives" earlier in this chapter. To insert a hard drive into the Hard Drive MultiBay Adapter: 1. Push the slide tab in the Hard Drive MultiBay Adapter toward the back of the adapter 1. 2. Hold the hard drive with the connector near the lower edge of the drive facing the connector inside the adapter 2. 3. Slide the drive toward the connector inside the adapter until it is seated 3. Placing a Hard Drive into the Hard Drive MultiBay Adapter 4. Release the adapter slide tab. (The tab returns to its original position if the drive is seated.) 5. Tuck the hard drive tab inside the adapter. 6. Follow the steps under "Inserting a Drive into the MultiBay." NOTE: The computer must be off before inserting or removing a hard drive. 6-8 Working with Removable Drives