Compaq Presario V2000 Compaq Presario V2000 Notebook PC - Hardware and Softwar - Page 89
Removing an Optical Disc (Without Power)
View all Compaq Presario V2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Multimedia Removing an Optical Disc (Without Power) If external or battery power is unavailable: 1. Insert the end of a paper clip 1 into the release access in the front bezel of the drive. 2. Press in gently until the tray is released, and then pull out the tray 2. 3. Remove the disc 3 from the tray by gently pressing down on the spindle while lifting the outer edges of the disc. Hold the disc by the edges and avoid touching the flat surfaces. ✎ If the media tray is not fully accessible, tilt the disc carefully as you remove it. 4. Close the media tray and place the disc in a protective case. Hardware and Software Guide 4-11
Multimedia
Hardware and Software Guide
4–11
Removing an Optical Disc (Without Power)
If external or battery power is unavailable:
1. Insert the end of a paper clip
1
into the release access in the
front bezel of the drive.
2. Press in gently until the tray is released, and then pull out the
tray
2
.
3. Remove the disc
3
from the tray by gently pressing down on
the spindle while lifting the outer edges of the disc. Hold the
disc by the edges and avoid touching the flat surfaces.
✎
If the media tray is not fully accessible, tilt the disc carefully
as you remove it.
4. Close the media tray and place the disc in a protective case.