Dell C1048P Port Extender Networking Configuration Guide for the C9000 Series - Page 234

3 Return to CONFIGURATION mode. CONFIG-ROUTE-MAP mode exit 4 Enter ROUTER BGP mode. CONFIGURATION mode router bgp as-number 5 Apply the route map to the neighbor or peer group's incoming or outgoing routes. CONFIG-ROUTER-BGP mode neighbor {ip-address | peer-group-name} route-map map-name {in | out} To view the BGP configuration, use the show config command in CONFIGURATION ROUTER BGP mode. To view a route map configuration, use the show route-map command in EXEC Privilege mode. Changing the NEXT_HOP Attribute You can change how the NEXT_HOP attribute is used. To change how the NEXT_HOP attribute is used, enter the first command. To view the BGP configuration, use the show config command in CONFIGURATION ROUTER BGP mode or the show running-config bgp command in EXEC Privilege mode. You can also use route maps to change this and other BGP attributes. For example, you can include the second command in a route map to specify the next hop address. • Disable next hop processing and configure the router as the next hop for a BGP neighbor. CONFIG-ROUTER-BGP mode neighbor {ip-address | peer-group-name} next-hop-self • Sets the next hop address. CONFIG-ROUTE-MAP mode set next-hop ip-address Changing the WEIGHT Attribute To change how the WEIGHT attribute is used, enter the first command. You can also use route maps to change this and other BGP attributes. For example, you can include the second command in a route map to specify the next hop address. • Assign a weight to the neighbor connection. CONFIG-ROUTER-BGP mode neighbor {ip-address | peer-group-name} weight weight • weight: the range is from 0 to 65535. The default is 0. • Sets weight for the route. Border Gateway Protocol IPv4 (BGPv4) 234