Dell C1048P Port Extender Networking Configuration Guide for the C9000 Series - Page 689

The default limit is 100K. If the total number of sources received from the peer is already larger than the limit when this configuration is applied, those sources are not discarded. To enforce the limit in such a situation, first clear the SA cache. Preventing MSDP from Caching a Local Source You can prevent MSDP from caching an active source based on source and/or group. Because the source is not cached, it is not advertised to remote RPs. 1 OPTIONAL: Cache sources that are denied by the redistribute list in the rejected SA cache. CONFIGURATION mode ip msdp cache-rejected-sa 2 Prevent the system from caching local SA entries based on source and group using an extended ACL. CONFIGURATION mode ip msdp redistribute list Example of Verifying the System is not Caching Local Sources When you apply this filter, the SA cache is not affected immediately. When sources that are denied by the ACL time out, they are not refreshed. Until they time out, they continue to reside in the cache. To apply the redistribute filter to entries already present in the SA cache, first clear the SA cache. You may optionally store denied sources in the rejected SA cache. R1(conf)#do show run msdp ! ip multicast-msdp ip msdp peer 192.168.0.3 connect-source Loopback 0 ip msdp redistribute list mylocalfilter ip msdp cache-rejected-sa 1000 R1_E600(conf)#do show run acl ! ip access-list extended mylocalfilter seq 5 deny ip host 239.0.0.1 host 10.11.4.2 seq 10 deny ip any any R1_E600(conf)#do show ip msdp sa-cache R1_E600(conf)#do show ip msdp sa-cache rejected-sa MSDP Rejected SA Cache 1 rejected SAs received, cache-size 1000 UpTime GroupAddr SourceAddr RPAddr LearnedFrom 00:02:20 239.0.0.1 10.11.4.2 192.168.0.1 local Reason Redistribute Multicast Source Discovery Protocol (MSDP) 689