Dell C1048P Port Extender Networking Configuration Guide for the C9000 Series - Page 58

File Storage The Dell Networking OS can use the internal Flash, external Flash, or remote devices to store files. The system stores files on the internal Flash by default, but can be configured to store files elsewhere. To view file system information, use the following command. • View information about each file system. EXEC Privilege mode show file-systems The output of the show file-systems command in the following example shows the total capacity, amount of free memory, file structure, media type, read/write privileges for each storage device in use. Dell#show file-systems Size(b) Free(b) 6429872128 6397476864 15775404032 15775399936 - - - - - - Feature Type Flags Prefixes FAT32 USERFLASH rw flash: FAT32 USBFLASH rw usbflash: - network rw ftp: - network rw tftp: - network rw scp: You can change the default file system so that file management commands apply to a particular device or memory. To change the default directory, use the following command. • Change the default directory. EXEC Privilege mode cd directory Copy Files to and from the System The command syntax for copying files is similar to UNIX. The copy command uses the format copy sourcefile-url destination-file-url. NOTE: For a detailed description of the copy command, refer to the Dell Networking OS Command Reference. • To copy a local file to a remote system, combine the file-origin syntax for a local file location with the file-destination syntax for a remote file location. • To copy a remote file to Dell Networking system, combine the file-origin syntax for a remote file location with the file-destination syntax for a local file location. Getting Started 58