Dell C1048P Port Extender Networking Configuration Guide for the C9000 Series - Page 525

id} [ , {vlan vlan_ID - vlan_ID} {{tengigabitethernet | fortyGigE} slot/port port} |{peGigE pe-id/unit-id/port-id}] Define the Interface Range The following example shows how to define an interface-range macro named "test" to select 10- GigabitEthernet interfaces 5/1 through 5/4. Dell(config)# define interface-range test tengigabitethernet 5/1 - 4 Choosing an Interface-Range Macro To use an interface-range macro, use the following command. • Selects the interfaces range to be configured using the values saved in a named interface-range macro. CONFIGURATION mode interface range macro name Example of Using a Macro to Change the Interface Range Configuration Mode The following example shows how to change to the interface-range configuration mode using the interfacerange macro named "test." Dell(config)# interface range macro test Dell(config-if)# Monitoring and Maintaining Interfaces Monitor interface statistics with the monitor interface command. This command displays an ongoing list of the interface status (up/down), number of packets, traffic statistics, and so on. To view the interface's statistics, use the following command. • View the interface's statistics. EXEC Privilege mode Enter the type of interface and slot/port information: • For the Management interface, enter the keyword ManagementEthernet then the slot/port information. • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then the slot/port information. • For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/port information. • For a port extender (PE) Gigabit Ethernet interface, enter the keyword peGigE then the pe-id/pestack-unit-id/port-number information. Example of the monitor interface Command The information displays in a continuous run, refreshing every 2 seconds by default. To manage the output, use the following keys. Interfaces 525