Dell C1048P Port Extender Networking Configuration Guide for the C9000 Series - Page 657

Type IEEE 802.1 Organizationally Specific TLVs 127 127 127 IEEE 802.3 Organizationally Specific TLVs 127 127 127 127 TLV Description Port-VLAN ID Port and Protocol VLAN ID Protocol Identity On Dell Networking systems, indicates the untagged VLAN to which a port belongs. On Dell Networking systems, indicates the tagged VLAN to which a port belongs (and the untagged VLAN to which a port belongs if the port is in Hybrid mode). Indicates the protocols that the port can process. The Dell Networking OS does not currently support this TLV. MAC/PHY Configuration/Status Power via MDI Link Aggregation Maximum Frame Size Indicates the capability and current setting of the duplex status and bit rate, and whether the current settings are the result of autonegotiation. This TLV is not available in the Dell Networking OS implementation of LLDP, but is available and mandatory (nonconfigurable) in the LLDP-MED implementation. Dell Networking supports the LLDP-MED protocol, which recommends that Power via MDI TLV be not implemented, and therefore Dell Networking implements Extended Power via MDI TLV only. Indicates whether the link is capable of being aggregated, whether it is currently in a LAG, and the port identification of the LAG. The Dell Networking OS does not currently support this TLV. Indicates the maximum frame size capability of the MAC and PHY. Link Layer Discovery Protocol (LLDP) 657