Dell C1048P Port Extender Networking Configuration Guide for the C9000 Series - Page 83

• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/port information. • For a VLAN interface, enter the keyword vlan then a number from 1 to 4094. • Configure a password. CONFIGURATION mode ip ftp password password • Enter a username to use on the FTP client. CONFIGURATION mode ip ftp username name To view the FTP configuration, use the show running-config ftp command in EXEC privilege mode, as shown in the example for Enable FTP Server. Terminal Lines You can access the system remotely and restrict access to the system by creating user profiles. Terminal lines on the system provide different means of accessing the system. The console line (console) connects you through the console port. The virtual terminal lines (VTYs) connect you through a remote session to the system. Denying and Permitting Access to a Terminal Line Dell Networking recommends applying only standard access control lists (ACLs) to deny and permit access to VTY lines. • Layer 3 ACLs deny all traffic that is not explicitly permitted, but in the case of VTY lines, an ACL with no rules does not deny traffic. • You cannot use the show ip accounting access-list command to display the contents of an ACL that is applied only to a VTY line. To apply an IP ACL to a line, Use the following command. • Apply an ACL to a VTY line. LINE mode ip access-class access-list Example of an ACL that Permits Terminal Access To view the configuration, use the show config command in LINE mode. Dell(config-std-nacl)#show config ! ip access-list standard myvtyacl seq 5 permit host 10.11.0.1 Dell(config-std-nacl)#line vty 0 Dell(config-line-vty)#show config Switch Management 83