Dell GX240 User's Guide - Page 61
Jumper Settings
UPC - 683728165390
View all Dell GX240 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
3 When the system setup screen appears, press to load the Dell default settings. The computer beeps when the settings are restored. 4 Press and then press to save your changes and exit. The computer reboots. Jumper Settings The following figure shows the jumpers on the system board. System Board Jumpers NOTE: Verify that the time, date, and year are corect and that the Secondary Drive 0 option is set to Auto. NOTICE: Make sure that your computer is turned off and unplugged before you change the jumper settings. Otherwise, damage to your computer or unpredictable results may occur. To change a jumper setting, pull the plug off its pin(s) and carefully fit it down onto the pin(s) indicated. Advanced Features 59
Advanced Features
59
3
When the system setup screen appears, press <Alt><F> to load the
Dell default settings.
The computer beeps when the settings are restored.
NOTE:
Verify that
the time, date, and year
are corect and that the
Secondary Drive 0
option
is set to
Auto
.
4
Press <Esc> and then press <Enter> to save your changes and exit.
The computer reboots.
Jumper Settings
The following figure shows the jumpers on the system board.
System Board Jumpers
NOTICE:
Make sure that your computer is turned off and unplugged before
you change the jumper settings. Otherwise, damage to your computer or
unpredictable results may occur.
To change a jumper setting, pull the plug off its pin(s) and carefully fit it
down onto the pin(s) indicated.