Dell GX240 User's Guide - Page 72
If you are replacing an expansion card, remove the current driver
UPC - 683728165390
View all Dell GX240 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
www.dell.com | support.dell.com NOTICE: Before disconnecting a device from the computer, wait 10 to 20 seconds after disconnecting the computer from its electrical outlet. Before removing a component from the system board, verify that the standby power light on the system board has turned off. To locate this light, see "System Board Components." 1 If you are replacing an expansion card, remove the current driver for the expansion card from the operating system. 2 Turn off the computer and devices, disconnect them from their electrical outlets, and wait 10 to 20 seconds. 3 Open the computer cover. 4 If you have a small desktop computer, remove the expansion-card cage. 70 Installing Upgrades
70
Installing Upgrades
www.dell.com | support.dell.com
NOTICE:
Before disconnecting a device from the computer, wait 10 to 20
seconds after disconnecting the computer from its electrical outlet. Before
removing a component from the system board, verify that the standby power
light on the system board has turned off. To locate this light, see “
System
Board Components
.”
1
If you are replacing an expansion card, remove the current driver for
the expansion card from the operating system.
2
Turn off the computer and devices, disconnect them from their
electrical outlets, and wait 10 to 20 seconds.
3
Open the computer cover
.
4
If you have a small desktop computer,
remove the expansion-card cage
.