Dell GX240 User's Guide - Page 91
clips snap into place at the ends of the DIMM.
UPC - 683728165390
View all Dell GX240 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
NOTICE: To avoid damage to the memory module, press the module straight down into the socket with equal force applied at each end of the module. c Press the DIMM straight down into the socket until the securing clips snap into place at the ends of the DIMM. DIMM Installation 3 2 1 1 socket 2 slot 3 securing clip 4 Close the computer cover, reconnect your computer and devices to their electrical outlets, and turn them on. NOTE: After you open and close the cover, the chassis intrusion detector causes the following message to appear on the screen at the next computer start-up: ALERT! Cover was previously removed. Installing Upgrades 89
Installing Upgrades
89
NOTICE:
To avoid damage to the memory module, press the module straight
down into the socket with equal force applied at each end of the module.
c
Press the DIMM straight down into the socket until the securing
clips snap into place at the ends of the DIMM.
DIMM Installation
4
Close the computer cover
, reconnect your computer and devices to
their electrical outlets, and turn them on.
NOTE:
After you open and close the cover, the chassis intrusion detector
causes the following message to appear on the screen at the next computer
start-up:
ALERT! Cover was previously removed.
1
2
3
1
socket
2
slot
3
securing clip