Dell GX280DT User Guide - Page 12

Remote Wake-Up Remote Wakeupcapable modem receives a wake up signal. Off is the default setting. On w/ Boot to NIC will allow the computer to attempt to boot from a network prior to using the boot sequence. NOTE: Normally, the system can be powered up remotely from suspend mode, hibernate mode, or when powered off. When Low Power Mode (in the Power Management menu) is enabled, the system can only be powered up remotely from Suspend. Suspend Mode The options are S1, a suspend state where the computer is running in a lowpower mode, and S3, a standby state where the power is reduced or turned off for most components, however, system memory remains active. Maintenance CMOS Defaults This setting will restore the computer's factoryinstalled default settings. The options are Cancel and Continue/Reset CMOS. Event Log Displays the system event log. BIOS Update Select the location of the BIOS update file. The options are Floppy Disk or Hard Drive. Video Primary Video This setting specifies which video controller is primary when two video controllers are present on the computer. POST Behavior Fastboot Numlock Key When set to On (default), your computer will start more quickly since it will skip certain configurations and tests. This option involves the rightmost bank of keys on your keyboard. When set to On (default), this option activates the numeric and mathematical features shown at the top of each key. When set to Off, this option activates the cursor-control