Dell GX280DT User Guide - Page 211
Removing a Floppy Drive
UPC - 851846002006
View all Dell GX280DT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 211 highlights
Floppy Drive CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide. CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before opening the cover. 1. Follow the procedures in "Before You Begin." 2. If you are installing a new floppy drive rather than replacing a drive, remove the front-panel inserts. Removing a Floppy Drive 1. Disconnect the floppy-drive cable from the system board connector (DSKT). 2. Remove the power cable from the interposer board. 3. Remove or raise the drive by pressing the green tabs on either side of the drive and lifting the drive up. 4. Remove the floppy-drive cable from the floppy drive: a. Remove the interposer board from the floppy drive by pressing on the tab and rotating the interposer board. b. To release the floppy-drive cable from the connector, slide the lever until it is fully extended, and then lift the cable away. 1 tab 2 interposer board 3 lever 4 floppy-drive cable 5 system board floppy-drive connector (DSKT)