Dell GX280DT User Guide - Page 54
Chassis Intrusion, On-Silent, Drive, Drives
UPC - 851846002006
View all Dell GX280DT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
1 drive 2 shoulder screws (3) 4. Connect the power and CD/DVD drive cables to the drive. 5. Gently slide the drive into place until you hear a click or feel the drive securely installed. 1 drive 6. Check all cable connections, and fold cables out of the way to provide airflow for the fan and cooling vents. 7. Close the computer cover. NOTICE: To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer. 8. Connect your computer and devices to their electrical outlets, and turn them on. See the documentation that came with the drive for instructions on installing any software required for drive operation. 9. After you open and close the cover, the chassis intrusion detector, if installed and enabled, causes the following message to appear on the screen at the next computer start-up: ALERT! Cover was previously removed. 10. Reset the chassis intrusion detector by changing Chassis Intrusion to On or On-Silent. NOTE: If an admin password has been assigned by someone else, contact your network administrator for information on resetting the chassis intrusion detector. 11. Update your configuration information by setting the appropriate Drive option (0 or 1) under Drives. See "System Setup" for more information. 12. Verify that your computer works correctly by running the Dell Diagnostics. Back to Contents Page