Dell Precision 490 Desktop User's Guide - Page 121
Memory Info, Installed Memory
View all Dell Precision 490 Desktop manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
11. Press to enter the system setup program and check the values listed under Memory Info. The computer should have changed the value of Installed Memory to reflect the newly installed memory. Verify the new total. If it is correct, skip to step 13. 12. If the memory total is incorrect, turn off and disconnect your computer and devices from their electrical outlets. Return to step 1 of this procedure, but instead of installing new memory, check the installed memory modules to ensure that they are seated properly in their sockets. 13. When the Installed Memory total is correct, press to exit system setup. 14. Run the Dell Diagnostics (see Dell Diagnostics) to verify that the memory modules are operating properly. Back to Contents Page
11.
Press <F2> to enter the system setup program and check the values listed under
Memory Info
.
The computer should have changed the value of
Installed Memory
to reflect the newly installed memory. Verify the new total. If it is correct, skip to
step 13
.
12.
If the memory total is incorrect, turn off and disconnect your computer and devices from their electrical outlets.
Return to
step 1
of this procedure, but instead of installing new memory, check the installed memory modules to ensure that they are seated properly in
their sockets.
13.
When the
Installed Memory
total is correct, press <Esc> to exit system setup.
14.
Run the Dell Diagnostics (see
Dell Diagnostics
) to verify that the memory modules are operating properly.
Back to Contents Page