Dell Precision 490 Desktop User's Guide - Page 81
USB for Flexbay
View all Dell Precision 490 Desktop manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
8. If no screws are attached to the reader, remove the shoulder screws from the inside of the drive panel and attach them to the new Media Card Reader. 1 drive 2 screws 9. Gently slide the reader into place until you hear a click or feel the drive securely installed. 10. Attach the interface cable to the Media Card Reader. 11. Connect the other end of the interface cable to the system board connector labeled "USB." To locate the system board connector, see System Board Components. 1 interface cable 2 Media Card Reader system-board connector (USB) 3 Media Card Reader 12. Replace the desktop drive retention insert and fold the handle down. 13. Check all cable connections, and fold cables out of the way to allow for airflow between the fan and cooling vents. 14. Reinstall the drive panel (see Replacing the Drive Panel). 15. Ensure that all connectors are properly cabled and firmly seated. 16. Replace the computer cover (see Replacing the Computer Cover). NOTICE: To connect a network cable, first plug the cable in to the network port or device and then plug it in to the computer. 17. Connect your computer and devices to their electrical outlets, and turn them on. See the documentation that came with the drive for instructions on installing any software required for drive operation. 18. Enter the system setup program (see System Setup) and select the appropriate USB for Flexbay option. 19. Verify that your computer works correctly by running the Dell Diagnostics. See Dell Diagnostics for instructions.