Dell Precision 490 Desktop User's Guide - Page 82
CD/DVD Drive
View all Dell Precision 490 Desktop manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
CD/DVD Drive CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide. CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before opening the cover. NOTICE: To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your computer's electronic components. You can do so by touching an unpainted metal surface on the computer. Removing a CD/DVD Drive (Tower Computer) 1. Follow the procedures in Before You Begin. 2. Remove the computer cover (see Removing the Computer Cover). 3. Remove the drive panel (see Removing the Drive Panel). 4. Disconnect the power and data cables from the back of the drive. 5. If you are uninstalling your only IDE CD/DVD drive and will not replace it at this time, disconnect the data cable from the system board and set it aside. If you are uninstalling a SATA optical drive and not replacing it, disconnect the SATA data cable from the system board. 1 IDE data cable 2 power cable 3 SATA data cable 4 system-board SATA optical connector 5 system-board IDE connector 6. Slide the sliding-plate lever to the right to release the shoulder screw and slide the drive out to remove it from the drive bay.