Dell Precision 490 Desktop User's Guide - Page 74
Diskette Drive
View all Dell Precision 490 Desktop manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
1 drive 2 screws 9. Gently slide the drive into the FlexBay until you hear a click or feel the drive securely installed. 10. Attach the power and data cables to the floppy drive. 11. Connect the other end of the data cable to the system board connector labeled "DSKT." To locate the system board connector, see System Board Components. 1 power cable 2 data cable 3 floppy-drive connector (DSKT) 12. Replace the desktop drive retainer insert and fold the handle down. 13. Check all cable connections, and fold cables out of the way to allow for airflow between the fan and cooling vents. 14. Reinstall the drive panel (see Replacing the Drive Panel). 15. Ensure that all connectors are properly cabled and firmly seated. 16. Replace the computer cover (see Replacing the Computer Cover). NOTICE: To connect a network cable, first plug the cable in to the network port or device and then plug it in to the computer. 17. Connect your computer and devices to their electrical outlets, and turn them on. See the documentation that came with the drive for instructions on installing any software required for drive operation. 18. Enter the system setup program (see System Setup) and select the appropriate Diskette Drive option. 19. Verify that your computer works correctly by running the Dell Diagnostics. See Dell Diagnostics for instructions.