Dell Precision 490 Desktop User's Guide - Page 15
System Setup Options - calendar
View all Dell Precision 490 Desktop manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
System Setup Options NOTE: Depending on your computer and installed devices, the items listed in this section may not be present or may not appear exactly as listed. System Processor Info Displays the following information for the processor installed in the system: Processor Type, Processor Clock Speed, Processor Bus Speed, Processor Cache Size, Processor ID number, whether the processor is Hyperthreading or Multicore Capable, and if the processor supports 64-bit Technology. Memory Info Displays the amount of Installed Memory, Memory Speed, Memory Channel Mode, and a description of the Memory Technology. This option also displays a table that describes the memory size, whether the memory module is ECC capable, single or dual rank, type, and organization. PCI Info Displays the contents of each PCI, PCI Express, and PCI-X slot. Date/Time Controls the system's internal calendar and clock. Boot Sequence Determines the order in which the system searches for boot devices during system startup. (Diskette drive default) NOTE: If you insert a boot device and restart the computer, this option appears in the system setup menu. To boot from a USB memory device, select the USB device and move it so it becomes the first device in the list. Drives Diskette Drive (Internal default) Enables and disables the floppy drives and sets read permission for the internal floppy drive. Off disables all floppy drives. USB disables the internal diskette drive and enables a USB floppy drive, if the USB controller is enabled and a USB drive is connected. Internal enables the internal floppy drive. Read Only enables the internal drive controller and allows the internal floppy drive read-only permission. Drives 0 through 4 NOTE: Operating systems with USB support will recognize USB floppy drives regardless of this setting. Enables or disables a SATA drive. On enables the interface so that the device can be used. Displays the Controller type (SATA), Port number the drive is using, Drive ID number, and Capacity.