Dell Precision 490 Desktop User's Guide - Page 63
About the Metal Shields Present in Some Drive, Configurations, Removing a Drive, Panel Insert
View all Dell Precision 490 Desktop manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
7. If the CD/DVD drive bay is unpopulated and metal shields are present in your computer (see About the Metal Shields Present in Some Drive Configurations), pull to remove the 5.25-inch metal shield. Then, remove the drive-panel insert from a 5.25-inch drive bay (see Removing a Drive-Panel Insert). 8. Flex the hard-drive bracket open and align the side holes in the hard drive with the plastic pins on the bracket; release the tension upon the bracket so that the hard drive is securely fastened. 1 hard drive 2 hard-drive bracket 9. Slide the hard drive in the hard-drive bracket into the hard-drive carrier. 1 hard-drive carrier 2 SATA hard drive in hard-drive bracket 10. Slide the hard-drive carrier into the 5.25-inch drive bay until it is securely seated. 1 desktop drive-retention insert 2 optional third SATA hard drive in hard-drive carrier 11. Replace the desktop drive retention insert and fold down its handle. 12. Connect a power cable to the hard drive.