Dell Precision 490 Desktop User's Guide - Page 72

Installing a Floppy Drive Desktop Computer

Get Dell Precision 490 Desktop PDF manuals and user guides View all Dell Precision 490 Desktop manuals
Add to My Manuals
Save this manual to your list of manuals

Page 72 highlights

c. Push the vented metal insert until it clicks into place and its metal tabs rest flush against the chassis surface. Then, install a drive-panel insert (see Replacing a Drive-Panel Insert). 1 FlexBay 2 vented metal insert 9. If you are installing another drive in the FlexBay, see the appropriate installation instructions in this section. 10. Replace the desktop drive retention insert and fold down its handle. 11. Reinstall the drive panel (see Replacing the Drive Panel). 12. Ensure that all connectors are properly cabled and firmly seated. 13. Replace the computer cover (see Replacing the Computer Cover). NOTICE: To connect a network cable, first plug the cable into the network port or device and then plug it into the computer. 14. Connect the computer and devices to electrical outlets, and turn them on. Installing a Floppy Drive (Desktop Computer) 1. Follow the procedures in Before You Begin. 2. Remove the computer cover (see Removing the Computer Cover). 3. Remove the drive panel (see Removing the Drive Panel). 4. Pull the desktop drive retention insert by the handle and set it aside in a safe place.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
c.
Push the vented metal insert until it clicks into place and its metal tabs rest flush against the chassis surface.
Then, install a drive-panel insert (see
Replacing a Drive
-
Panel Insert
).
9.
If you are installing another drive in the FlexBay, see the appropriate installation instructions in this section.
10.
Replace the desktop drive retention insert and fold down its handle.
11.
Reinstall the drive panel (see
Replacing the Drive Panel
).
12.
Ensure that all connectors are properly cabled and firmly seated.
13.
Replace the computer cover (see
Replacing the Computer Cover
).
14.
Connect the computer and devices to electrical outlets, and turn them on.
Installing a Floppy Drive (Desktop Computer)
1.
Follow the procedures in
Before You Begin
.
2.
Remove the computer cover (see
Removing the Computer Cover
).
3.
Remove the drive panel (see
Removing the Drive Panel
).
4.
Pull the desktop drive retention insert by the handle and set it aside in a safe place.
1
FlexBay
2
vented metal insert
NOTICE:
To connect a network cable, first plug the cable into the network port or device and then plug it into the computer.