Dell Precision 490 Desktop User's Guide - Page 55
The only SATA connectors on the board that support hard drives are those labeled SATA0, SATA1,
View all Dell Precision 490 Desktop manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
1 drive 2 hard-drive bracket NOTICE: SAS drives and SATA drives cannot be mixed in the rotatable hard-drive carrier. The drives in the hard-drive carrier must both be either SATA or SAS hard drives. 9. Slide the hard drive into the hard-drive bay until it clicks securely into place. 10. Connect a power cable to the hard drive. NOTICE: The only SATA connectors on the board that support hard drives are those labeled SATA0, SATA1, and SATA2. 11. If you are installing a SATA hard drive, connect the data cable to the hard drive. 1 P3 power connector 3 hard-drive power cable 2 SATA data cable 4 hard-drive If you are installing a SAS hard drive, connect the data cable on the SAS controller card to the hard drive.
9.
Slide the hard drive into the hard-drive bay until it clicks securely into place.
10.
Connect a power cable to the hard drive.
11.
If you are installing a SATA hard drive
, connect the data cable to the hard drive.
If you are installing a SAS hard drive,
connect the data cable on the SAS controller card to the hard drive.
1
drive
2
hard-drive bracket
NOTICE:
SAS drives and SATA drives cannot be mixed in the rotatable hard-drive carrier. The drives in the hard-drive carrier must both be either SATA or
SAS hard drives.
NOTICE:
The only SATA connectors on the board that support hard drives are those labeled SATA0, SATA1, and SATA2.
1
P3 power connector
3
hard-drive power cable
2
SATA data cable
4
hard-drive