Dell Precision T5400 User's Guide - Page 133
address, value, See Keyboard Problems
View all Dell Precision T5400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 133 highlights
INSERT BOOTABLE MEDIA - Insert a bootable floppy disk, CD, or other bootable media. INVALID CONFIGURATION INFORMATION - PLEASE RUN SETUP PROGRAM - Enter the system setup program (see "System Setup" on page 89) and correct the computer configuration information. KEYBOARD FAILURE -See "Keyboard Problems" on page 112. MEMORY ADDRESS LINE FAILURE AT address, READ value EXPECTING value - See "Memory Problems" on page 114. MEMORY ALLOCATION ERROR - 1 Turn off the computer, wait 30 seconds, and then restart the computer. 2 Try to run the program again. 3 If the error message appears again, see the software documentation for additional troubleshooting suggestions. MEMORY DATA LINE FAILURE AT address, READ value EXPECTING value - MEMORY DOUBLE WORD LOGIC FAILURE AT address, READ value EXPECTING value - MEMORY ODD/EVEN LOGIC FAILURE AT address, READ value EXPECTING value - MEMORY WRITE/READ FAILURE AT address, READ value EXPECTING value - MEMORY SIZE IN CMOS INVALID - See "Memory Problems" on page 114. NO BOOT DEVICE AVAILABLE - • If the floppy drive is your boot device, ensure that a bootable floppy disk is in the drive. • If the hard drive is your boot device, ensure that the cables are connected and that the drive is installed properly and partitioned as a boot device. • Enter system setup and ensure that the boot sequence information is correct (see "System Setup" on page 89). Troubleshooting Tools 133