Dell Precision T5400 User's Guide - Page 213
Rotate the hard-drive carrier out of the computer see Rotating the Hard, system board.
View all Dell Precision T5400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 213 highlights
3 Remove the computer cover (see "Removing the Computer Cover" on page 153). NOTICE: If only one hard drive is to be installed, it should be connected to the SATA0 connector on the system board. 4 Disconnect the hard drive power cable from the hard drive that you are removing. 1 2 3 1 data connector 3 hard drive 2 power connector 5 Disconnect the data cable from the hard drive that you are removing. Do not disconnect the data cable for an uninstalled hard drive from the system board. 6 Rotate the hard-drive carrier out of the computer (see "Rotating the HardDrive Carrier Back into the Computer" on page 159). 7 Press the blue tabs on each side of the hard-drive bracket toward each other and slide the drive up and out of the hard-drive bay. Adding and Replacing Parts 213