Dell Precision T5400 User's Guide - Page 220
If it is connected to a card and you will not be reinstalling the drive, route
View all Dell Precision T5400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 220 highlights
1 sliding-plate lever 2 SATA data cable 3 power cable 4 power supply 5 SATA connector on system board 6 optional SATA hard drive in FlexBay 7 Disconnect the data cable from the back of the hard drive and from the connector on the system board. If it is connected to a card and you will not be reinstalling the drive, route the data cable to the side. 8 Slide the sliding-plate lever to the right to release the shoulder screw and slide the drive out of the FlexBay. 1 2 1 sliding-plate lever 2 optional third hard drive in FlexBay 9 Set the drive aside in a secure location. NOTICE: If metal shields are present in your computer configuration, they must be installed at all times while your computer is in use or your computer may not function properly. 220 Adding and Replacing Parts