Dell Precision T5400 User's Guide - Page 162
Enabled or Enabled-Silent. See Resetting the Chassis Intrusion Detector
View all Dell Precision T5400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 162 highlights
a Align the computer cover with the tabs on the computer base. b Pivot the cover down and gently press the cover until it clicks into place. c Ensure that the cover is locked. If not, repeat all of step 3. 1 2 1 computer cover 2 computer base NOTICE: To connect a network cable, first plug the cable into the network port or device and then plug it into the computer. 4 Connect your computer and devices to electrical outlets, and turn them on. 5 After you open and close the cover, the chassis intrusion detector, if enabled, causes the following message to appear on the screen at the next computer start-up: ALERT! Cover was previously removed. 6 Reset the chassis intrusion detector by changing Intrusion Alert to Enabled or Enabled-Silent. See "Resetting the Chassis Intrusion Detector" on page 76. 162 Adding and Replacing Parts