Dell Precision T5400 User's Guide - Page 190
Installing Memory
View all Dell Precision T5400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 190 highlights
1 Follow the procedures in "Before You Begin" on page 151. 2 Remove the computer cover (see "Removing the Computer Cover" on page 153). 3 Rotate the hard-drive carrier out of the computer (see "Rotating the Hard- Drive Carrier Back into the Computer" on page 159). CAUTION: Fully-buffered memory modules may become very hot during normal operation. Ensure that memory modules have had sufficient time to cool before you touch them. 4 Press out the securing clip at each end of the memory module connector. 1 2 1 memory module 2 securing clip (2) 5 Grasp the module and pull up to lift the memory module from the memory riser card. If a module is difficult to remove, gently ease it back and forth to remove it from the connector. 6 Rotate the hard-drive carrier back into place (see "Rotating the Hard-Drive Carrier Back into the Computer" on page 159). 7 Replace the computer cover (see "Replacing the Computer Cover" on page 161). Installing Memory CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide. 190 Adding and Replacing Parts