Dell Precision T5400 User's Guide - Page 252
Connect the other end of the data cable to the system board connector
View all Dell Precision T5400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 252 highlights
8 If no screws are attached to the drive, remove the shoulder screws from the inside of the drive panel and attach the screws to the new drive. 1 2 1 drive 2 screws 9 Gently slide the drive into the FlexBay until you hear a click or feel the drive securely installed. 10 Attach the power and data cables to the floppy drive. 11 Connect the other end of the data cable to the system board connector labeled "DSKT." To locate the system board connector, see "System Board Components" on page 28. 252 Adding and Replacing Parts
252
Adding and Replacing Parts
8
If no screws are attached to the drive, remove the shoulder screws from the
inside of the drive panel and attach the screws to the new drive.
9
Gently slide the drive into the FlexBay until you hear a click or feel the
drive securely installed.
10
Attach the power and data cables to the floppy drive.
11
Connect the other end of the data cable to the system board connector
labeled "DSKT." To locate the system board connector, see "System Board
Components" on page 28.
1
drive
2
screws
1
2