Dell Precision T5400 User's Guide - Page 199
See the documentation for the card for information about the card's cable
View all Dell Precision T5400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 199 highlights
1 2 1 card retention door 2 release tab 12 Rotate the card retention door until it snaps into place. NOTICE: Do not route card cables over or behind the cards. Cables routed over the cards can prevent the computer cover from closing properly or cause damage to the equipment. 13 Connect any cables that should be attached to the card. See the documentation for the card for information about the card's cable connections. 14 If the card was installed in a slot close to the hard-drive carrier, check to see if there are any cables or other protrusions that might block the card retention mechanism from being lowered completely. If this is the case: Adding and Replacing Parts 199
Adding and Replacing Parts
199
12
Rotate the card retention door until it snaps into place.
NOTICE:
Do not route card cables over or behind the cards. Cables routed over the
cards can prevent the computer cover from closing properly or cause damage to
the equipment.
13
Connect any cables that should be attached to the card.
See the documentation for the card for information about the card’s cable
connections.
14
If the card was installed in a slot close to the hard-drive carrier, check to see
if there are any cables or other protrusions that might block the card
retention mechanism from being lowered completely. If this is the case:
1
card retention door
2
release tab
1
2