Dell Precision T5400 User's Guide - Page 256
Insert the metal insert's two upper screws and its two lower screws into
View all Dell Precision T5400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 256 highlights
1 2 1 sliding-plate lever 2 Media Card Reader NOTICE: If metal shields are present in your computer configuration, they must be installed at all times while your computer is in use or your computer may not function properly. 7 If you are not installing another drive in the drive bay and metal shields are present in your computer (see "About the Metal Shields Present in Some Drive Configurations" on page 207), reinstall the vented metal insert over the FlexBay and the empty space beneath it: a Insert the metal insert's two upper screws and its two lower screws into the corresponding slots inside the FlexBay. b Push the vented metal insert until it clicks into place and its metal tabs rest flush against the chassis surface. Then, install a drive-panel insert (see "Replacing a Drive-Panel Insert" on page 236). 256 Adding and Replacing Parts